- Protocol
- Granit Protocol
- Server Port
- 5112
- Status
- Supported on FleetStack
G-100 GPS Tracker (Granit)
The G-100 reports to FleetStack over the Granit protocol on server port 5112. Point the tracker at your FleetStack host and that port, and its position and status messages decode straight into the platform.
Product Details
The G-100 is listed in the FleetStack device catalogue as a Granit-protocol tracker. Because FleetStack already runs a Granit decoder on port 5112, the G-100 needs no custom integration work — set the tracker server host and port, set the SIM APN, and the device appears in live GPS tracking as soon as it sends its first position report.
FleetStack decodes 7 models on the Granit protocol, so a mixed fleet of Granit hardware shares a single port and one set of server settings, with no per-model configuration to maintain. The device port list carries the port for every protocol, and the GPS command list carries the SMS and GPRS commands used to point a tracker at a new server.
Once it is reporting, G-100 telemetry drives geofencing, trip management, route management, driver behavior scoring, maintenance reminders and the alert center. The same data is available through the REST API if you are feeding it into your own systems, and FleetStack can be deployed as white-label GPS tracking software under your own brand.
FleetStack Advantage
Get on-trip and off-trip vehicle distance covered
Monitor deviated distance, time, and number of vehicle trips
Analyse aggressive driving behaviour, including overspeeding, harsh braking, acceleration, and cornering
Detect towing events with alerts
Track driver performance, incident summary, top drivers, and much more
Prevent vehicle theft with geofencing
Manage the maintenance of the vehicles efficiently and on time
Create and manage trips on the move
Integration Details
- Model
- G-100
- Protocol
- Granit
- Server Port
- 5112
- Status
- Supported on FleetStack
Platform Support
- Live Tracking
- Yes
- Geofencing & Alerts
- Yes
- Trip & Route Reports
- Yes
- Driver Behavior
- Yes
- REST API Access
- Yes
- White Label
- Yes
Resources & Documentation
Device setup
Frequently Asked Questions
Which server port does the G-100 use with FleetStack?
The G-100 reports on port 5112, which is where the FleetStack Granit decoder listens. Your server host is issued with your account credentials. Ports for every supported protocol are listed on the device port list.
How do I connect the G-100 to FleetStack?
Set the tracker server host to your FleetStack host and its port to 5112, then set the SIM APN for your network — usually over SMS configuration. The GPS command list carries the SMS and GPRS commands, the video tutorials cover the platform side, and technical support can help commission a device.
Which protocol does the G-100 use?
The G-100 uses the Granit protocol. FleetStack decodes 7 models on Granit, so a mixed fleet of Granit hardware runs on one port and one set of server settings. Browse them all on supported devices.
What can I do with G-100 data in FleetStack?
Position and status reports from the G-100 drive live GPS tracking, geofencing, trip management, driver behavior scoring and the alert center — the same feature set every supported device shares.
Add the G-100 to FleetStack
FleetStack already decodes the Granit protocol on port 5112, so the G-100 can be onboarded without custom development. View pricing, book a demo to see the platform with your own hardware, or contact us for help with the device configuration.