- Protocol
- Tytan Protocol
- Server Port
- 5084
- Status
- Supported on FleetStack
Tytan SAT DS540 GPS Tracker
The Tytan SAT DS540 reports to FleetStack over the Tytan protocol on server port 5084. Point the tracker at your FleetStack host and that port, and its position and status messages decode straight into the platform.
Product Details
The Tytan SAT DS540 is listed in the FleetStack device catalogue as a Tytan-protocol tracker. Because FleetStack already runs a Tytan decoder on port 5084, the Tytan SAT DS540 needs no custom integration work — set the tracker server host and port, set the SIM APN, and the device appears in live GPS tracking as soon as it sends its first position report.
FleetStack decodes 3 models on the Tytan protocol, so a mixed fleet of Tytan hardware shares a single port and one set of server settings, with no per-model configuration to maintain. The device port list carries the port for every protocol, and the GPS command list carries the SMS and GPRS commands used to point a tracker at a new server.
Once it is reporting, Tytan SAT DS540 telemetry drives geofencing, trip management, route management, driver behavior scoring, maintenance reminders and the alert center. The same data is available through the REST API if you are feeding it into your own systems, and FleetStack can be deployed as white-label GPS tracking software under your own brand.
FleetStack Advantage
Get on-trip and off-trip vehicle distance covered
Monitor deviated distance, time, and number of vehicle trips
Analyse aggressive driving behaviour, including overspeeding, harsh braking, acceleration, and cornering
Detect towing events with alerts
Track driver performance, incident summary, top drivers, and much more
Prevent vehicle theft with geofencing
Manage the maintenance of the vehicles efficiently and on time
Create and manage trips on the move
Integration Details
- Model
- Tytan SAT DS540
- Protocol
- Tytan
- Server Port
- 5084
- Status
- Supported on FleetStack
Platform Support
- Live Tracking
- Yes
- Geofencing & Alerts
- Yes
- Trip & Route Reports
- Yes
- Driver Behavior
- Yes
- REST API Access
- Yes
- White Label
- Yes
Resources & Documentation
Device setup
Frequently Asked Questions
Which server port does the Tytan SAT DS540 use with FleetStack?
The Tytan SAT DS540 reports on port 5084, which is where the FleetStack Tytan decoder listens. Your server host is issued with your account credentials. Ports for every supported protocol are listed on the device port list.
How do I connect the Tytan SAT DS540 to FleetStack?
Set the tracker server host to your FleetStack host and its port to 5084, then set the SIM APN for your network — usually over SMS configuration. The GPS command list carries the SMS and GPRS commands, the video tutorials cover the platform side, and technical support can help commission a device.
Which protocol does the Tytan SAT DS540 use?
The Tytan SAT DS540 uses the Tytan protocol. FleetStack decodes 3 models on Tytan, so a mixed fleet of Tytan hardware runs on one port and one set of server settings. Browse them all on supported devices.
What can I do with Tytan SAT DS540 data in FleetStack?
Position and status reports from the Tytan SAT DS540 drive live GPS tracking, geofencing, trip management, driver behavior scoring and the alert center — the same feature set every supported device shares.
Add the Tytan SAT DS540 to FleetStack
FleetStack already decodes the Tytan protocol on port 5084, so the Tytan SAT DS540 can be onboarded without custom development. View pricing, book a demo to see the platform with your own hardware, or contact us for help with the device configuration.