JM-LL01 LTE Asset Tracker
JM-LL01 is an LTE asset tracker with low power consumption and optimized data transmission. It is built for long-term asset tracking with a large internal battery, tamper detection, and magnetic installation.
Everything needed to evaluate this GPS device
Key Features
LTE connectivity for modern wireless broadband asset communication.
Long-lasting battery capacity supports extended tracking duration.
Tamper alerts notify users when the device is removed from an asset.
Strong magnetic design makes installation quick and convenient.
Water-resistant body supports stable operation in outdoor conditions.
Optimized data transmission helps reduce power consumption.
Performance & Parameters
- Product Type
- Concox
- Country of Origin
- China
- Dimension (L*W*H)
- 109*61*30.5
- Weight
- 297g
- Number of Sims
- 1
- IP rating
- IP65
- Build in Battery
- 10000mAh
- Stand By Duration
- 15 days
- Storage logs
- 1000
- Build in Memory
- 32+32Mb
- GPS Chipset
- MTK High Sensitivity chip
- GPS fixed time with AGPS
- cold start=40sec, hot start=1sec
- GPS Signal
- L1, 1575.42MHz C/A code
- GPS Channels
- 66
- GPS Sensitivity
- Tracking:- 165dBm Capturing:- 14dBm
- GPS Positioning Accuracy
- <10
- GPS ANT
- Internal
- Frequency
- GSM:850/900/1800/1900 MHz
- Internet Protocol
- 1
- Working Temperature
- -20?to+70?
Supported Functions
Documents & Manual
Other Supported Devices
Frequently Asked Questions
Which server port does the JM-LL01 use with FleetStack?
The JM-LL01 reports on port 10013. The server host is issued with your FleetStack account credentials. Ports for every other model are listed on the device port list.
What is the JM-LL01 used for?
JM-LL01 is an LTE asset tracker with low power consumption and optimized data transmission. It is built for long-term asset tracking with a large internal battery, tamper detection, and magnetic installation. It is listed as a lte asset tracker on FleetStack — browse the full range on supported devices.
Which capabilities does the JM-LL01 support?
The JM-LL01 reports position and status to FleetStack, feeding GPS tracking, geofencing and the alert center. The documents above carry the manufacturer's full specification.
How do I connect the JM-LL01 to FleetStack?
Point the tracker at your FleetStack server host and port 10013 with the SIM APN set for your network, usually over SMS configuration. The GPS command list carries the SMS and GPRS commands, the video tutorials walk through the platform side, and technical support can help commission a device.